Bragi by Barco Residential

Bragi

Using Barco’s renowned Pulse electronic and software platform, Bragi is powered by a revolutionary, new, high lumens density (HLD) RGB LED light engine.

Bragi takes its name from an historical ninth-century poet. His poems were so outstandingly artful and moving that subsequent generations imagined that, upon his death, Odin had appointed him the court poet of Valhalla.

Bragi, being Balder’s brother and inherits the same design philosophy, optical core and lenses.

Book a demo

State of the art electronics

Our Pulse electronics are built on a superior FPGA platform featuring a dual core processor on the industry’s only 20 nm SoChave, with 96 transceiver lanes delivering 3.3Tbps of serial bandwidth.

Thanks to our unique single step processing technology(SSPTM), Pulse electronics are designed to process 4K UHD, HDMI 2.0a, HDCP 2.2 and HDR10 signals with extremely low latency.

Bragi uses the very latest 0.9" DMD DLP chipset, to display flawless 4K UHD (3,840 × 2,160 px) images.

LED Engine

Bragi uses a new optical engine, incorporating the best elements from previous models and combining them with new technologies, creating an even better optical engine.

Bragi’s optical engine is not the only part that is redesigned, the light source is brand new, and this time it’s not laser. The light source uses the very latest high lumens density (HLD), LED illumination technology.

HLD LED is unique in that it works around the ‘law of etendue’ (a property of light in an optical system, which characterizes how “spread out” the light is in area and angle...) to deliver a superb color experience and incredible brightness while enabling new levels of resolution.

RealColor

Combining HLD LED illumination with regular LED colors which appear more saturated, the human eye is tricked to interpret this as richer, brighter colors than they are physically measured. Bragi also includes a motorized DCI/P3 filter for improved HDR color accuracy.

Additionally, Barco’s RealColor processing enables simple and accurate calibration to your desired color gamut or white point.

Devialet Expert 220 integrated amplifier

SPECIFICATIONS

Note: Clicking on the following link will take you out of Atlas to the official Barco Residential website.

Read more in detail

Projector type

Single chip DLP

Technology

0.9" DMD™

Resolution

3,840 x 2,160 (4K UHD)

Aspect ratio

1.78:1

Light source

Solid State RGB LED

Light source lifetime

Up to 50,000 hours *
Brightness mode dependent

Light output

Up to 2,600 ANSI Lumens

CLO (constant light output)

Yes

Contrast ratio

1,800:1 Sequential
450:1 ANSI

Brightness uniformity

>90%

Lens range

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1)
(R9802241) - EN61 (1.70 - 2.50:1)
(R9801211) - EN44 (2.50 - 4.60:1)

Optical lens shift
Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection)

Optical dowser

Yes

Color correction

P7 RealColor™

Color gamut

REC.709
DCI (P3) via internal filter

Image processing

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientation

360° Rotation

Network connection

10/100 Ethernet via RJ45 connection

Integrated web server

Yes

Diagnostics

via Prospector web interface

HDR

HDR10

Active Stereoscopic 3D
Additional hardware required please contact Atlas

Inputs

1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI

1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Input resolutions

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latency

TBD

Control

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant

NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.

Power requirements

100 - 240V / 50 - 60Hz

Power consumption

570 W maximum

BTU per hour

1,945 BTU/h - Max

Noise level (typical at 25°C/77°F)

30 - 33 dB(A) Max

Operating temperature

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Operating humidity

20 to 80% (relative humidity)

Airflow requirements

Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear

Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 25cm
Rear: 25cm
Top: 1cm

Exhaust airflow

58 ft3/min @ 22.9 °C
99 m3/hour @ 22.9 °C

Dimensions (WxLxH)

Excluding Lens
450 x 482 x 255 mm

Weight

Excluding Lens
21.5 kg

Shipping dimensions (WxLxH)

Excluding Lens
464 x 679 x 773 mm

Accessories

Power Cord, Remote Control

Certifications

CE, FCC Class A and cCSAus

Warranty

Limited 3 years parts and labor
Extendable up to 5 years

24/7 operation
This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.